Phone: (601)354-2756


Main => Motors Electric =>AC Motors =>Vector Duty

US Motors | VN1T2BC | 1HP | 1800RPM | 3600RPM2 | 3PH | 0-60HZ | 145TC | TENV
VIN#: 1169055168
Qty on hand Qty on hand: Stock
Share this Info
Print this Page

Condition:New
Catalog Number:VN1T2BC
Manufacturer:US Motors
Enclosure:TENV
Frame:145TC
Hertz:0-60
HP:1
Mounting:Horz-Footed
Phase:3
RPM:1800 / 3600
Voltage:230/460

Definite Purpose Three Phase, Totally Enclosed Non-Ventilated (TENV) Vector Duty 0-1800 RPM (0-60 Hz) Speed Range Constant Torque

APPLICATIONS:
Designed for conveyors, presses, hoists or other inverter powered applications having constant torque requirements at or near zero speed.

FEATURES:
  • Inverter Grade® Insulation System (Meets NEMA MG-1 Part 31)
  • Class F Thermostats (1/Phase), Premium Efficient, Special Balance
  • Cast Iron Frame (140: Rolled Steel), Cast Iron End Brackets
  • Corrosion Resistant Mill & Chemical Duty Paint
  • Stainless Steel Nameplate & Zinc Plated Hardware
  • Shaft Slinger On Pulley End For IP54 Protection
  • 40C Ambient, NEMA Design A Performance
  • Conversion Kits: Cast Iron Conduit Box, C&D Flanges
  • Double Shielded Bearings, Regreasable 250 Frame & Up
  • Lifting Provisions 180 Frame & Up
  • 5-28 Volt 1024 PPR Encoder, Quadrature Output
  • 9 Pin Sub-D Encoder Connector Standard, 10 Pin MS Connector Optional
  • Double Dip & Bake With Extra Bracing
  • Class F Insulation, 1.15 S.F. On Sine Wave / 1.0 S.F. On PWM
  • Constant Horsepower To 90 Hz, Cast Iron Inner Bearing Caps (180 Frame & Up)

Notes:

  • TENV Enclosure