Phone: (601)354-2756


Main => Motors Electric =>AC Motors =>Energy Efficient

US Motors | ELT150E2F | 150HP | 1800RPM | 3PH | 60HZ | 445T | TEFC
VIN#: 1169408489
Qty on hand Qty on hand: Stock
Share this Info
Print this Page

Condition:New
Catalog Number:ELT150E2F
Manufacturer:US Motors
Enclosure:TEFC
Full Load PF:85.0
Frame:445T
Hertz:60
HP:150
Model No.:ES52
Mounting:Horz-Footed
Phase:3
RPM:1800
Type:ELT
Voltage:460

GENERAL PURPOSE
THREE PHASE, TEFC SEVERE DUTY
ENERGY EFFICIENT - ALL CAST IRON

APPLICATIONS:
Designed for manual release, brake torque adjustments, external air gap adjustments and where high cycling is required. Bulk material handling equipment, conveyors, cranes and hoists.

C Face Footed
FEATURES:
  • Fully comply with EPACT 92 and NRCan efficiency standards
  • Inverter Grade insulation to meet NEMA MG-1 Part 31 Specification
  • on 140 to 280 frames
  • Inverter Grade insulation to meet NEMA MG-1 Part 30 Specification
  • 10:1 variable torque; 4:1 constant torque on inverter power
  • 40°C ambient, continuous duty
  • Double shielded bearings through 280 frame
  • Open bearings 320 to 440 frame
  • Double drilled feet to accommodate mounting flexibility
  • Vacuum Pressure Impregnation (VPI) Insulation
  • Nema design B performanc
  • Nema design B performance
  • Shaft seal V-ring
  • Lifting provisions
  • Field convertible to F-2 mounting
  • Corrosion resistant mill & chemical duty paint
    on 320 to 440 frames * Stainless steel nameplate and zinc plated hardware
  • Dual Voltage nameplated @ 60Hz and 50 Hz
  • Full 50 Hz power at rated HP
  • DOE Compliance Certification - CC030A/CC050A
  • CE mark on nameplate
  • CSA 390 Certified
  • Field convertible C flange kits available for up to 280 frame
  • UL Component Recognized through 280 frame, above 280 pending