Phone: (601)354-2756


Main => Motors Electric =>AC Motors =>Hostile Duty

Siemens | 1.5HP | 1200RPM | 3PH | 60HZ | 182T | EXP
VIN#: 1170105562
Qty on hand Qty on hand: Stock
Share this Info
Print this Page

Condition:New
Manufacturer:Siemens
Enclosure:EXP
Frame:182T
Hertz:60
HP:1.5
Mounting:Horizontal Foot Mounted
Phase:3
RPM:1200
Type:RGZZESD
Voltage:230/460

Hazardous Duty High Efficient
Class I, Groups C & D, Division 1
RGZZESD

Class I, Groups C & D, Division 1
RGZZESD Horizontal Foot Mounted

 

These high efficiency explosion-proof
motors are UL® listed for hazardous gas
environments, and are suitable for use
in Class I, Groups C & D, Division 1
hazardous areas. They are ideal for use
in applications such as chemical
processing, mining, foundry, pulp and
paper, waste management, and
petro/chemical.

Performance Specifications

  • 1 to 300 HP
  • 1.0 service factor, 40ºC ambient
  • T3C temperature code
  • 900, 1200, 1800, or 3600 RPM
  • 3 phase, 60 Hz; 230/460 volt operation under 25 HP, 460 volt 25 HP and above; 200 & 575 volt available
  • Class F insulation, Class B temperature rise
  • NEMA design B, continuous duty
  • 143T through 449T frame

Features for Long Life

Frame and End Shields – Cast iron
frame and end shields for exceptional
structural integrity, with sintered
condensation drains on 404T – 449T
frames. Lifting eyebolts are included for
frames 213T to 449T.

Rotor – A unique offset rotor bar design
provides improved efficiency while
larger bars and end rings reduce
resistance for lower rotor losses. Each
die cast aluminum rotor assembly is
dynamically balanced for extended
bearing life, and includes a highstrength
carbon steel (C1045) shaft for
maximum rotor performance.

Stator/Windings – Manufactured with
premium electrical grade steel
laminations and copper electrical
magnet wire to lower losses for
improved efficiencies. A unique stator
core design lowers flux density while
increasing cooling capacity. Large
conductor cross section reduces
resistance and lowers stator losses.

Insulation – Proprietary Class F nonhygroscopic
insulation system with
NEMA Class B temperature rise, provides
an extra margin of thermal life. Two
series-connected normally-closed Class B
thermostats are supplied as standard.

Cooling – A bi-directional, non-sparking
fan is locked and keyed to the shaft. Its
low-inertia design reduces windage
losses, improves airflow, reduces noise
and provides dependable cooling. Cast
iron fan covers are provided on all frame
sizes.

Bearings – Regreasable, oversized single
shielded bearings with cast iron inner
caps. Alemite grease fittings on the
inlets, and pipe plugs on the relief ports
for ease of routine maintenance. Frames
143T – 256T are equipped with a shaft
seal on the drive end; 284T – 449T
frames have a drive end V-ring slinger
for added bearing life.

Lubrication – A specially formulated,
high temperature tested, polyurea based
grease is used to provide more than four
times the lubrication life of other
polyurea greases.

Oversized Conduit Box – Cast iron
construction that is larger than industry
standards, diagonally-split and rotatable
in 90º increments for quick and easy
connections. Includes a ground lug and
non-wicking, clearly and permanently
marked leads.

Corrosion Resistance – Cast iron
construction, zinc-plated hardware,
epoxy enamel paint and stainless steel
nameplate resist rust and corrosion.

Modifiable – All Siemens motors are
available with a wide variety of
modifications to meet your specific
motor needs


Error Occurred While Processing Request

Error Occurred While Processing Request

Error Diagnostic Information

ODBC Error Code = 37000 (Syntax error or access violation)

[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'CDATA' in database 'CFXClient' because the 'PRIMARY' filegroup is full.

Date/Time: 10/23/17 06:45:46
Browser: CCBot/2.0 (http://commoncrawl.org/faq/)
Remote Address: 54.166.245.10
Query String: item=1170105562