Phone: (601)354-2756

Main => Motors Electric =>AC Motors =>Medium Voltage

Teco-Westinghouse K40010R HP: 400 Volts: 2300/4160 RPM: 720
VIN#: 1194406151
Qty on hand Qty on hand: Stock
Share this Info
Print this Page

Catalog Number:K40010R
Enclosure:Totally Enclosed Fan Cooled (IP54 Rating)
Model No.:K40010R
Mounting:Fl Mounted


  • 'R' = Motor stocked standard with a drive-end roller bearing.
  • Refer to factory for availability



FL Eff: 93.0
FL Pf: 77.0
FL Amps (2300V): 105.0
Approx. Shipping WT.lbs: 7,749

  • Pumps
  • Fans
  • Compressors
  • 100 - 800 HP
  • 3600, 1800, 1200, 900 RPM Normally in Stock. Slower Speeds Available.
  • Totally Enclosed Fan Cooled (IP54 Rating)
  • Standard Efficient Design
  • 36 Month Warranty from Date of Manufacture
  • 3 Phase, 60 Hz, 2300 / 4160V
  • Standard with 120V Space Heaters Terminated in Separate Auxiliary Box
  • Standard with 100 Ohm Platinum Stator RTDs, 2 per Phase, Terminated in Separate Auxiliary Box
  • 1.15 Service Factor - Continuous
  • Class F Thermalastic® Epoxy Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - Fully Gasketed with NPT Threaded Entrances - Fl Mounted.
  • Designed for 40°C Ambient Temperature - Note (1)
  • Designed for 3300 ft. Elevation - Note (2)
  • Bi-Directional Rotation Except 2 Pole Motors 5000 Frame and Larger which are Unidirectional CCW Facing the Drive-End. See EXTRAS / OPTIONS Below if CW Rotation is Required.
  • Cast Iron Frame, End Bells, and Conduit Box
  • Cast Iron Fan Cover for Frames 440T-5000. Rolled Steel Fan Cover for Frames 5800 and Larger.
  • 1045 Carbon Steel Shaft
  • Copper / Copper Alloy Rotor Construction with the Exception of 440 - 5000 Frames which have Die Cast Aluminum
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Blue Gray - Munsell 7.5BG 4/2
  • Vacuum De-Gassed Regreasable Ball Bearings Using Polyrex EM Grease
  • Labyrinth Type Metal Grease Flinger on Both Ends
  • Cast Iron Inner and Outer Bearing Caps
  • Grounding Terminal Inside Main Box and on Motor Foot
  • Stainless Steel Nameplate
  • Suitable for Use on a VFD - Notes (3)(4)(5)(6)
  • 6 Leads
  • Motors are CSA Approved

Extras / Options:


  1. Please consult factory for suitability in higher ambients.
  2. Please consult factory for suitability in higher elevations.
  3. Service factor is 1.0 when motor is used on a VFD.
  4. An isolation transformer or other method of mitigating common mode voltages from motor terminals must be utilized.
  5. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.
  6. Please contact TWMC for variable and constant torque speed ranges.