Phone: (601)354-2756

Main => Motors Electric =>AC Motors =>Medium Voltage

Teco-Westinghouse KG3002 HP: 300 Volts: 2300/4160 RPM: 3600
VIN#: 1194448935
Qty on hand Qty on hand: Stock
Share this Info
Print this Page

Catalog Number:KG3002
Enclosure:Totally Enclosed Fan Cooled (IP54 Rating)
Model No.:KG3002
Mounting:F1 Mounted


  • Motors are unidirectional, with counter clockwise rotation, facing the drive-end side. To change direction please consult factory for adder.



FL Eff: 95.4
FL Pf: 90.5
FL Amps (2300V): 65.1
Approx. Shipping WT.lbs: 3500

  • Pumps
  • Fans & Blowers
  • Compressors
  • 150 - 900 HP
  • 3600, 1800, 1200, 900 RPM
  • Totally Enclosed Fan Cooled (IP54 Rating)
  • NEMA Premium Efficient Design (up to 500 HP, 1200 RPM)
  • 36 Month Warranty from Date of Manufacture
  • 3 Phase, 60 Hz, 2300 / 4160V
  • Standard with 120V Space Heaters Terminated in Separate Auxiliary Box
    Standard with 100 Ohm Platinum Stator RTDs, 2 per Phase, Terminated in Separate Auxiliary Box
  • Factory Self Certified for Class I, Division II, Groups B, C, D, T3B - Note (1)
  • 1.15 Service Factor – Continuous
  • Class F Thermalastic® Epoxy Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrances - F1 Mounted.
  • Designed for 40°C Ambient Temperature - Note (2)
  • Designed for 3300 ft. Elevation - Note (3)
  • Bi-Directional Rotation Except 2 Pole Motors which are Unidirectional CCW Facing the Drive-End. See EXTRAS / OPTIONS Below if CW Rotation is Required.
  • Cast Iron Frame, End Bells, and Conduit Box
  • Rolled Steel Fan Cover
  • 1045 Carbon Steel Shaft
  • Copper / Copper Alloy Rotor Construction with the Exception of 5000 Frame 900 RPM Motors which have Die Cast Aluminum
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Blue Gray – Munsell 7.5BG 4/2
  • Vacuum De-Gassed Regreasable Ball Bearings Using Polyrex EM Grease
  • Labyrinth Type Metal Grease Flinger on Both Ends
  • Cast Iron Inner and Outer Bearing Caps
  • Grounding Terminal Inside Main Box and on Motor Foot
  • Stainless Steel Nameplate
  • Suitable for Use on a VFD - Notes (4)(5)(6)(7)
  • 6 Leads
  • Motors are CSA Approved

Extras / Options:


  1. Please see modifications section if auxiliary nameplate stating this info is required.
  2. Please consult factory for suitability in higher ambients.
  3. Please consult factory for suitability in higher elevations.
  4. Service factor is 1.0 when motor is used on a VFD.
  5. An isolation transformer or other method of mitigating common mode voltages from motor terminals must be utilized.
  6. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.
  7. Please contact TWMC for variable and constant torque speed ranges.