Phone: (601)354-2756


Main => Motors Electric =>AC Motors =>Medium Voltage

Teco-Westinghouse P6008R HP: 600 Volts: 2300/4160 RPM: 900
VIN#: 1194729218
Qty on hand Qty on hand: Stock
Share this Info
Print this Page

Condition:New
Catalog Number:P6008R
Manufacturer:Teco-Westinghouse
Enclosure:WPI
Frame:6806C
Hertz:60
HP:600
Model No.:P6008R
Mounting:F1 Mounted
Phase:3
RPM:900
Voltage:2300/4160

Notes:

  • 'R' = Motor stocked standard with a drive-end roller bearing.
  • Refer to factory for availability

GLOBAL-HD WPI MEDIUM VOLTAGE
TYPE ASHA

Applications:

FL Eff: 94.1
FL Pf: 84.0
FL Amps (2300V): 142.0
Approx. Shipping WT.lbs: 6,983



  • Pumps
  • Fans & Blowers
  • Compressors
  • 100 - 1250 HP
  • 3600, 1800, 1200, 900 RPM Normally in Stock. Slower Speeds Available.
  • Weather Protected Type I Enclosure (IP44 rating)
  • Standard Efficient Design
  • 36 Month Warranty from Date of Manufacture
  • 3 Phase, 60 Hz, 2300 / 4160V
  • Standard with 120V Space Heaters Terminated in Separate Auxiliary Box
  • Standard with 100 Ohm Platinum Stator RTDs, 2 per Phase, Terminated in Separate Auxiliary Box
  • 1.15 Service Factor - Continuous
  • Class F Thermalastic® Epoxy Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments – Fully Gasketed with NPT Threaded Entrances - F1 Mounted.
  • Designed for 40° C Ambient Temperature - Note (1)
  • Designed for 3300 ft. Elevation - Note (2)
  • Bi-Directional Rotation Except 2 Pole Motors 5000 Frame and Larger which are Unidirectional CCW Facing the Drive-End. See EXTRAS / OPTIONS Below if CW Rotation is Required.
  • Cast Iron Frame, End Bells, and Conduit Box
  • 1045 Carbon Steel Shaft
  • Copper / Copper Alloy Rotor Construction with the Exception of 440T/TS Frame which have Die Cast Aluminum
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Blue Gray – Munsell 7.5BG 4/2
  • Vacuum De-Gassed Regreasable Ball Bearings Using Polyrex EM Grease
  • Labyrinth Type Metal Grease Flinger on Both Ends
  • Cast Iron Inner and Outer Bearing Caps
  • Grounding Terminal Inside Main Box and on Motor Foot
  • Stainless Steel Nameplate
  • Suitable for Use on a VFD - Notes (3)(4)(5)(6)
  • 6 Leads
  • Motors are CSA Approved

Extras / Options:

Notes:

  1. Please consult factory for suitability in higher ambients.
  2. Please consult factory for suitability in higher elevations.
  3. Service factor is 1.0 when motor is used on a VFD.
  4. An isolation transformer or other method of mitigating common mode voltages from motor terminals must be utilized.
  5. Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD.
  6. Please contact TWMC for variable and constant torque speed ranges.